Results 1 to 2 of 2

Thread: Stands for 846B

  1. #1
    Inactive Member marko445's Avatar
    Join Date
    March 6th, 2005
    Posts
    3
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I'm looking to build some stands for my 846B's. Any thoughts on what height they should be would be appreciated.

  2. #2
    Senior Hostboard Member GM's Avatar
    Join Date
    December 26th, 2002
    Location
    Chamblee, Ga.
    Posts
    4,967
    Follows
    0
    Following
    0
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    48 Post(s)

    Post

    Greets!

    Depends on the app, IOW seating distance, ear height to ground when seated.

    With a fixed HF horn mounting though, optimum vertical placement is severely limited due to its collapsing dispersion with increasing frequency and the polar response at the XO point, so for the M19's proper time delay, raising it up to where the midpoint between the horn and woofer's horizontal centers is at ear height would be 'close enough' for a typical range of HI-FI listening distances.

    If space/SAF allows, angling in the speakers till their on-axis centers cross in front of the 'sweet spot' should improve imaging/soundstaging if the room's acoustics haven't already been delt with.

    GM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 28131802 times.